| PART NUMBER |
SERIES |
PILOT TYPE |
PILOT DIA. |
BOLT CIRCLE DIA. |
BOLT HOLE COUNT |
BOLT HOLE DIA. |
C/L TO FACE |
SWING DIA. |
JOINT ANGLE |
NOTES |
VEHICLE CLASS |
BRAND |
|---|
3-2-1819 |
1410 |
F |
2.000 |
4.250 |
4 |
0.500 |
1.625 |
5.240 |
0 |
Square pattern, Ford trucks with hole in center. |
LD |
Spicer |
| 2-2-1379 |
1310 |
F |
2.000 |
4.250 |
4 |
0.484 |
1.625 |
5.219 |
19 |
Sq Bolt Pattern / Fits Ford cars (Mustang, T-Bird, and others), trucks Ranger and possible the Explorer. It also fits the Mazda pickup from 1996 and later. |
LD |
Spicer |
| 3-2-1619 |
1350 |
F |
2.000 |
4.250 |
4 |
0.410 |
1.625 |
5.250 |
0 |
M12-1.75 holes, square pattern |
LD |
Spicer |
| 3302-1369 |
1330 |
F |
2.000 |
4.250 |
4 |
0.500 |
1.625 |
5.250 |
0 |
Square pattern, used at rear end from early 90's and up. |
LD |
PTI |
| T2-2-1369A |
1330 |
F |
2.000 |
4.250 |
4 |
0.500 |
1.625 |
5.250 |
0 |
6061-T6 Forged Aluminum / 45% Lighter |
LD |
PTI |
| T3-2-1579A |
1350 |
F |
2.000 |
4.250 |
4 |
0.500 |
1.625 |
5.250 |
0 |
6061-T6 Forged Aluminum / 47% Lighter |
LD |
PTI |
| 3502-1579 |
1350 |
F |
2.000 |
4.250 |
4 |
0.500 |
1.625 |
5.250 |
0 |
Square pattern, fits Ford 8.8 and 9.75 all years. This flange has a large hole for clearance |
LD |
PTI |
| 4102-1819 |
1410 |
F |
2.000 |
4.250 |
4 |
0.500 |
1.625 |
5.240 |
0 |
Square pattern, Ford trucks with hole in center. |
LD |
Spicer |
| 3502-1619 |
1350 |
F |
2.000 |
4.250 |
4 |
0.410 |
1.625 |
5.250 |
0 |
M12-1.75 holes, square pattern |
LD |
PTI |
| 3502-1580 |
1350 |
F |
2.000 |
4.250 |
4 |
0.500 |
1.625 |
5.250 |
0 |
Square pattern. This flange has a larger hole for pinion nut clearance |
LD |
PTI |
| 3-2-1699 |
1350 |
F |
2.680 |
4.250 |
4 |
0.410 |
1.625 |
5.250 |
0 |
Sq Bolt Pattern / Bolt holes are M12-1.75 threaded. Ford 4x4 Trucks usually located at the rear output of the transfer case. If you want to convert the driveshaft to a CV type use our part number 3502-42. |
LD |
Spicer |
| 4102-1709 |
1410 |
F |
2.680 |
4.250 |
4 |
0.410 |
1.625 |
5.352 |
12 |
Sq Bolt Pattern / M12-1.75 Threaded, Fits Ford truck . Same as 3-2-1709 |
LD |
PTI |
| 3-2-1709 |
1410 |
F |
2.680 |
4.250 |
4 |
0.410 |
1.625 |
5.352 |
12 |
Proprietary to Ford. Use 4102-1709 |
LD |
Spicer |
| 3502-1699 |
1350 |
F |
2.680 |
4.250 |
4 |
0.410 |
1.625 |
5.250 |
0 |
Sq Bolt Pattern / Bolt holes are M12-1.75 threaded. Ford 4x4 Trucks usually located at the rear output of the transfer case. If you want to convert the driveshaft to a CV type use our part number 3502-42. |
LD |
PTI |
Filters: BOLT CIRCLE DIAMETER = 4.250, CENTERLINE TO FACE = 1.625, 